Ultraseal 3750 MTO Bridge Deck Membrane is a hot applied waterproofing compound specially formulated to protect and waterproof bridge and parking decks. It is homogenously blended to produce a compound that displays excellent low temperature flexibility, elongation, resilience, good adhesive properties, and will accommodate movements caused by thermal cycling.

Ultraseal 3750 MTO is used to protect structures from damages caused by the infiltration of moisture. It is effectively installed on the following:

• Concrete bridge decks
  
• Parking garage decks
  
• Roofing
  
• Portland Cement Concrete
  
• Asphalt Concrete
  
• It can be installed over concrete, gypsum board, plywood or metal.
  

Ultraseal 3709 is a thin penetrating primer consisting of selected asphalt, solvents, and other modifiers blended to meet the requirements of CGSB 37-GP-9Ma.

Its intended use is for the priming and sealing of absorbent surfaces and to improve the bonding characteristics of most asphaltic coatings and finishes. Concrete, Asphalt, Masonry, Thermal, Insulation, Roofing Felts and similar surface can be primed with Ultraseal 3709.

• Ultraboard 1913 is constructed for use as a protective layer for waterproofing/roofing membranes. The tough, durable nature of the product makes it capable of withstanding the shock and impact of rugged backfilling, construction traffic, as well as on-site foot traffic. Used in conjunction with Ultraseal 3750 MTO Bridge Deck Membrane as a protective layer in the waterproofing of concrete bridge decks, where asphalt hot-mix paving is installed over a layer of the board.